2022.07.14
Introduction
MPO (male)-LC/SC/FC/ST Fan-out 0.9mm 30cm patch cable are designed for MPO-LC LGX module cassettes are terminated with MPO and LC/SC/FC/ST connector on each end. It's specifically designed for high-density fiber patch-ing in data centers which need space saving and reduce cable management troubles.
SM 8F MPO-LC/SC/FC/ST Fanout 0.9mm cable are optimized for 40G QSFP+ PLR4 to 10G SFP+ LR optics direct connection and high-density data center applications.
OM3/OM4 8F MPO-LC/SC/FC/ST Fanout 0.9mm cable are op-timized for 40G QSFP+ SR4 to 10G SFP+ SR, 100G QSFP SR4 to 25G SFP-25G-SR-S optics direct connection and high-density data center applications.
This 8 Fiber harness cable is used for a direct connection between QSFP+ to (4) SFP+ ports with no patch panels or intermediate trunks in between.
Features
● 100% pre-terminated and tested in factory to ensure transfer performance.
● Low insertion loss, high return loss
● MT based Multi-fiber Connector, 4,8,12 and 24 fiber connector terminations and assemblies
● Economical solution for mass-termination of fiber
● Designed for low loss and standard loss SM and MM applications
● Ruggedized round cable, oval cable and bare ribbon options available
● Color coded housings available to differentiate fiber type, polish type and/or connector grade
● Good in repeatability and exchangeability
Application
● Data communication network.
● Optical System Access network.
● Storage area networking fiber channel.
● High density architectures.
Product Parameters
Spec items. |
Single mode (APC 8-degree polished) |
Multimode (PC Flat polish) |
|
Insertion loss (MPO) (IEC 61300-3-34) |
Standard loss：≤0.75dB(max), ≤0.50dB(Typical) Super Low loss：≤0.35dB(max), ≤0.20dB(Typical) |
Standard loss：≤0.6dB(max), ≤0.50(Typical) Super Low loss：≤0.35dB(max) , ≤0.20dB(Typical) |
Insertion loss (LC/SC/FC/ST) (IEC 61300-3-6) |
≤0.3dB |
≤0.3dB |
Return loss(MPO) |
≥60dB（8degree polishing） |
≥25dB |
Return loss(LC/SC/FC/ST) |
APC≥60dB; UPC≥50dB |
≥35dB |
Durability |
||
Interchangeability |
≤0.2dB |
|
Tensile strength |
>70N |
|
Operating Temperature |
-40 to + 85°C |
|
MPO End-Face 3D Interference Index
Item (IEC-61300-3-30) |
Minimum |
Maximum |
||
Radius of curvature (mm) |
ROC-X(ABS) |
2000 |
\ |
|
ROC-Y(ABS) |
50mm |
\ |
||
|
Angle |
Angle-X |
-0.2° |
-0.2° |
|
Angle-Y |
APC |
7.85° |
8.15° |
|
PC |
-0.2° |
-0.2° |
||
Fiber height (nm) |
1000nm |
3500nm |
||
Max.DH.All Fiber: |
-300nm |
300nm |
||
DH.Adj: |
-300nm |
300nm |
||
DH.Ave Fiber: |
-300nm |
300nm |
||
Core Dip: |
SM |
N/A |
N/A |
|
MM |
-200nm |
300nm |
||
LC/SC/FC/ST End-Face Geometry 3D Interference Index
Items |
Connector |
PC End-face |
APC End-face |
Radius of Curvature |
SC/FC/ST |
10~25 mm |
5~12 mm |
LC/MU |
7~25 mm |
5~15 mm |
|
Apex Offset |
≤50 um |
||
Fiber Spherical Height |
+/- 100 nm |
||
Angular Offset |
------ |
8°± 0.5° |
|
End-face Quality (LC/SC/FC/ST SM)
Zone |
Range (μm) |
Scratches |
Defects |
Reference |
A: Core |
0 to 25 |
None |
None |
IEC 61300- 3-35:2015 |
B: Cladding |
25 to 115 |
None |
None |
|
C: Adhesive |
115 to 135 |
None |
None |
|
D: Contact |
135 to 250 |
None |
None |
|
E: Rest of ferrule |
None |
None |
||
End-face Quality (LC/SC/FC/ST MM)
Zone |
Range (μm) |
Scratches |
Defects |
Reference |
A: Core |
0 to 65 |
None |
None |
IEC 61300-3 -35:2015 |
B: Cladding |
65 to 115 |
None |
None |
|
C: Adhesive |
115 to 135 |
None |
None |
|
D: Contact |
135 to 250 |
None |
None |
|
E: Rest of ferrule |
None |
None |
||
Connector |
Reference |
Housing Details |
MPO Singlemode |
IEC 61754-7 |
SM APC: Green connectors+black boot (Standard Loss MPO) SM APC: Yellow connectors+black boot (Super low loss MPO) |
|
MPO Multimode |
IEC 61754-7 |
OM1&OM2 PC: Beige connectors+black boot (Standard Loss MPO) OM3&OM4 PC: Aqua connectors+black boot (Standard&Super low loss MPO) OM3&OM4 PC: Heather Violet connectors+black boot (Standard loss MPO) |
Meets IEC Standard IEC-61754-7; IEC61755, Telcordia GR-1435-CORE, JIS C5982; TIA-604-5(FOCIS5) compliant
Structured cabling per TIA-568-C 10G Fiber Channel Compliant
Other connectors' Industrial Standard:
SC: TIA/EIA, FOCIS3, GR-326.NTT-SC IEC61754-4 and JIS C5973.
LC: TIA/EIA, FOCIS10, GR-326 EIA/TIA-604-10, IEC61754-20 and JIS C5973. FC: EIA /TIA-604-04, FOCIS4, NTT-FC, GR-326. IEC61754-13 and JIS C5973 ST: TIA/EIA, FOCIS2, GR-326. IEC61754-2 and JIS C5973 Etc.
E2000: IEC61754-15
Available for
G657A1 MPO-LC, MPO-SC，MPO-FC，MPO-SC，MPO-ST，MPO-E2000
G657A2/B2 MPO-LC, MPO-SC，MPO-FC，MPO-SC，MPO-ST，MPO-E2000
G657B3 MPO-LC, MPO-SC，MPO-FC，MPO-SC，MPO-ST，MPO-E2000
OM1 62.5/125 MPO-LC, MPO-SC，MPO-FC，MPO-SC，MPO-ST，MPO-E2000
OM2 50/125 MPO-LC, MPO-SC，MPO-FC，MPO-SC，MPO-ST，MPO-E2000
OM3 50/125 MPO-LC, MPO-SC，MPO-FC，MPO-SC，MPO-ST，MPO-E2000
OM4 50/125 MPO-LC, MPO-SC，MPO-FC，MPO-SC，MPO-ST，MPO-E2000
OM5 50/125 MPO-LC, MPO-SC，MPO-FC，MPO-SC，MPO-ST，MPO-E2000
